Also DSP clock rate has been risen from 40MHz to 74MHz. Faster clock rate means that even multiple DelFX effects programs will not use up all DSP power, and Delfina Kernel will not need to bring down the sound codec clock rate from 48kHz, as it often does on Delfina Lite. Delfina Plus is capable of 220 million operations per second, which of course means nothing in simple use, but sure comes handy with multiple sound processing with effects piped in. A graphical interface used for sound piping will be introduced.
In our tests the effective performance improvement has been much more than the clock rate increase, because faster clock also makes the codec and memory transfer tasks use up smaller portion of total DSP load. User can view the current DSP load with the DelfLoad program.
Some advantages of Delfina Plus against other sound cards:
Video display board for any Amiga computer that has a video slot. Features three different type of video output: 1) a 31.5 kHz Flicker Free output via a high density 15 pin connector (standard VGA type connector). This output allows you to view your Amiga's RGB video output on any standard VGA or SVGA monitor (as long as it scans down to 30 kHz horizontal) and provides flicker free viewing of all NTSC and PAL modes. It in no way effects any other screen modes including DBLNTSC and DBLPAL. The result is a rock solid image of all your NTSC modes while allowing for the running of video peripherals like genlocks, the Video Toaster or other devices that require you to be in NTSC mode. It also eliminates the need to the DBLNTSC or DBLPAL modes which requires much more Chip RAM than NTSC or PAL modes. 2) A Y/C video output (more commonly referred to as an S-VHS output) providing a standard NTSC or PAL connection to S-VHS and Hi-8 VCRs and Camcorder or other devices that make use of the Y/C connector. 3) A Composite output with a RCA type connector providing a standard NTSC connection to any video device accepting a composite video signal. All Three of these connectors can be used at the same time thus allowing recording of images to a VCR while viewing it flicker free on a S-VGA monitor (perfect to Scala or other Multimedia applicatations). Optional Video Decoder Daughter board and SVHS (Y/C) Genlock daughter board will be available shortly.
Super Scan: $ 159.95
External RGB scan doubler providing a 31.5Khz signal for viewing on any standard VGA or S-VGA monitor. The Super Scan one High Density 15 pin VGA connector for output and has 4 different inputs including: 1) A 23 pin connector for connecting the standard 23 pin RGB port of any Amiga. 2) A 15 pin connector for connecting any 15 pin based computer including PCs and Macs. 3) Y/C input allowing the output of any S-Video (S-VHS, Hi-8 and others) to be displayed on a VGA Monitor. 4) Composite Video input allowing the output of any standard composite device (VHS VCR) to be displayed on a VGA Monitor. Summary of Features: - Double Scans Amiga and NTSC or PAL Video (TV) signal into VGA 31.5K - works on all Amiga models (A500 - A4000T) - inputs - CVBS (Video), SVHS (Y/C), and PC (640 x 480) inputs - use your VGA monitor to display the Amiga, PC and TV/VCR - externally connects to Amiga RGB port (23 pin), PC (15 Pin), composite and S-Video - output - VGA HD-15 pin female connector.
Super Scan Flicker Fixer: $ 134.95
Daughter board for the Super Scan. This is not a stand alone product; this board is added into the Super Scan to provide flicker free display of the NTSC and PAL modes inputed into the Super Scan.
1208MA for A1200 Computers: $ 74.95
Speeds up the math-intensive operations. A must have feature if you do any morphing, animation, image manipulation or ray tracing, and offers the option of running either a PGA or PLCC type FPU. Expandable to 8MB of 32 Bit memory. Built in, Real Time Clock. Fits into trap door for easy installation.
LightWave 5.0 Upgrade Amiga CD: $ 289.95
LightWave 5.5 Intel CD: $ CALL!
LightWave 5.5 Upgrade Intel CD: $ CALL!
LightWave 3D is an all-in-one photo-realistic animation system. LightWave 3D has been used on television shows such as SeaQuest DSV, Babylon 5, Hercules, and Star Trek: The Next Generation, Star Trek: Voyager, Robocop, Viper, Unsolved Mysteries, and Weird Science. LightWave is also used by tens of thousands of people to create graphics for corporate videos, commercials, video games, print graphics and much more. LightWave 4.0 includes a number of new features, including inverse kinematics for character animation. There will also be a new plug-in filter system that will allow users to add features like real world physics or advanced animation features. LightWave Modeler will also feature multiple undo and redo, and Metaform, which allows simple creation of organic and aerodynamic objects. LightWave will offer the same basic feature set on all platforms as well as full cross-compatibility. This will allow users to bring scenes, objects, textures and other LightWave files from one platform to another, such as their home-based Amiga or PC to the SGI they use at work.
Toaster 4.1 Upgrade CD-ROM: $ 499.95
Allows any Video Toaster (original Video Toaster and Video Toaster 4000) owner to upgrade their existing Toaster software (includes Toaster 1.0, 2.0, or 3.1) adding megabytes of new software, features, and functionality! The software is only available on CD-ROM due to the large size of the software and content included with this long awaited upgrade. It includes the 4.1 CD-ROM, a 4.1 Toaster/Flyer manual, and a rebate coupon for the purchase of a Flyer. Just a few of the new features available on Toaster 4.1 are: Completely redesigned switcher interface with sequencing, project editing, file utility, and live switching all integrated in one interface. Over 100 new ToasterFX for all Amigas, new ColorFX for Amiga 4000 and 40001T. Totally new ToasterPaint Full screen painting always, smooth airbrush, PostScript font support, complete image processing, and more. Upgraded ToasterCG with PostScript text brush allowing rotation, skewing, and interactive resizing, improved graphic support with better display and multi-format support, spellcheck, and much more. Lightwave 4.0 with inverse kinematics, plug in capabilities, metaform modeling, and hundreds of other new features. Toaster 4.1 requires a CD-ROM drive (CD file system not included) for installation, a minimum of 200MB of free hard drive space, 10MB of RAM (2MB Chip RAM required), a 68030 accelerator or better (FPU required for LightWave 3D) and operates in an Amiga 2000, 3000, 3000T, 4000 or 4000T computer with an original Video Toaster or a Video Toaster 4000.
Video Toaster 4000: $ 2079.95
Video Toaster Flyer: $ 4195.00
Octopus Custom Flyer SCSI Serial Cable: $ 129.00
We configure complete Toaster/Flyer systems. Call for pricing.
An external video converter that allows a user to utilize any standard VGA or SVGA monitor in most Amiga modes. The Amiga's ability to change scan rates, through user configuration and software, has made it difficult to find off the shelf monitors that can be used directly. The Gecko provides an interface to VGA displays so any standard monitor can be used. Modes supported include NTSC, PAL, DBL NTSC, DBL PAL, Productivity, and the Video Toaster.
PAWS 1200: $ 2369.00
The PAWS or Portable Amiga Workstation is designed to allow Amiga users who posses an Amiga 1200 model computer to turn their desktop systems into a video laptop. The kit provided is 95% pre-assembled. The only tools required are a screwdriver and a pair of needle nose pliers. No technical degree or soldering required. The PAWS has the look and feel of a real laptop and provides such features as the ability to utilize battery power, system warning of low power condition, internal battery charger and more!
PAWS 1200 BUNDLE: $ 2875.00
The PAWS 1200 - Portable Amiga Workstation Bundle comes pre- installed with Amiga 1200 motherboard with 3.1 AmigaDOS, Amtrade 1.76MB HD Internal Disk Drive, Western Digital 540MB IDE HD and 2MB RAM. The PAWS has the look and feel of a real laptop and provides such features as the ability to utilize battery power, system warning of low power condition, internal battery charger and more!
Features: Dual dissolve control knobs provide freely adjustable, varying degree of overlay or invert (keyhole) effect, Auto Video pass-thru allows signal to continue to flow through to your monitor even when the video or Amiga signal source is off, Extra video-thru port provides separate line monitoring of video signals only, Extra RGB pass-thru enables separate line monitoring of RGB signals for real time editing of Amiga graphics, Key-in port for expansion with external keying device, Compatible with all Amiga models and CDTV.
SuperGen SX Genlock: Call
Features: True broadcast quality video output, True Y/C genlock and overlay, Two independent dissolve controls, Software controllable, S-Video to composite or composite to S-Video transcoding built in, Interpretive dissolve mode, Switchable 3.58MHz notch filters, Switchable video input selection, Switchable genlock disable for productivity mode uses, One S- Video Input. One S-Video output. One Composite video input. One Composite video output. Professional key out for use with switchers, Switchable chroma notch filter, selectable blanking, BNC and S-Video connectors, Fast Sync Tip Clamp, Key output, Internal RS-170A blanking generator, Switchable setup adder, Compatible with all Amiga Models. Available for NTSC or PAL, please specify when ordering.
SuperGen SX Studio: Call
Includes above genlock plus Brilliance 2.0 and Broadcast Titler 2 software. Available for NTSC or PAL, please specify when ordering.
Real Time color capture from any video source. It has even more features than Vidi Amiga 12 and the added benefit of image capture from moving video. Full AGA chipset support as standard. Compatible with: A500/600/1200/1500/2000/3000/4000 OS 2.0/3.0/3.1 Features: Real Time Image Capture, Composite & SVHS inputs, Time Lapse remote image grabbing, Swipe & Play Animation Workstation, File support for BMP, TIFF, & PCX, Load & Save 24 Bit ILBM & ANIMS.
Vidi Amiga 24 RT Pro: $ 329.95
Professional or serious user. True color real time image capture from any video source. Photorealistic image capture with 24 bit file option to bridge Amiga and PC. Improved image enhancement and algorythm to produce screen and output files of the highest quality. Full AGA chipset support as standard. Compatible with: A500/600/1200/1500/2000/3000/4000 OS 2.0/3.0/ 3.1 Features: Real Time Image Capture, Composite & SVHS inputs, 16.7 million color grabbing, Swipe & Play Animation Workstation, ILBM, ANIM, BMP, TIFF & PCX, Image Processing controls & effects.
Designed to record computer animation sequences directly to a hard drive and play them back in real time. Plugs directly into an Amiga expansion slot and replaces both the expensive animation record VCR and the single frame controller. Supports direct rendering of all common image formats.
Personal TBC IV: $ 829.00
Continues in the tradition of professional video at a price any person can afford. New features of the TBC IV include component digital 4:2:2 processing, Y/C input and output, software controlled color balance. Component Video Exchange port for use with the PAR, etc.
Personal V-Scope: Call
The world's first waveform monitor and vectorscope for desktop video. Produces a digitally synthesized waveform monitor and vectorscope display which can be superimposed onto any video signal. Any NTSC video signal may be used. Both Amiga and PC compatible.
Back
to Previous Page.